Go Back   Mitsubishi Lancer Register Forum > General Stuff > Picture & Video Gallery

Reply
 
Thread Tools Rate Thread Display Modes
Old 03-02-2016, 15:59   #1
Paul7rs2
Senior User
 
Paul7rs2's Avatar
 
Join Date: Mar 2013
Posts: 909
My Evo 5 600hp build

Purchased the car late summer 2015 from a fellow mlr member I think the car is quite well known as its been an mlr members car from import or at least a long time.



Since owning the car it has undergone a lot of changes and should be back out around the end of February beginning of March for plenty of track day abuse and a trip to the ring end of June



Car has always been dry stored and only used in the summer times since import so underside is very very clean no rust at all anywhere, under sealed with a clear wax oil so all can be seen. Below I will list the current spec of the vehicle and some pictures of when I first bought the car and how it looks now. Car is currently at CPP getting a full build and should be finished by the end of February.



How the car looked when I first bought it.







Soon as I got it home I got the machine polisher out as it was badly scratched due to being a track car and black. Surprisingly it came up very very well!





Next up was original orange indicators and side's. Some newer Evo 9 front calipers and a full refurb of all 4 brakes and new stickers as they were looking a little tired, new stop tech discs and rc5 pads, new brake flexi hoses and fresh fluid.





I did a couple of track days and started to really enjoy it, but wanted a little more grip so I ordered some wider wheels, stiffer suspension, and better tyres.

So I ordered some genuine RPF1's from America

8.5jx17 et30 in black

4x 225/45-/17's toyo r888 tyres

Then trackdaysplitters made me a custom big front splitter.











1-2 more track days then the summer was gone, then the changes started again so I started looking about and found a genuine tommi mak bumper, some recaro SPG seats although they aren't matching they fit me much better. A few other little bits and pieces and then I wanted more power so I looked around asked all the questions and ended up taking my car to CPP and going with a 2.0 LR and precision turbo along with all supporting mods needed to be a reliable and fast track day car but to hit my 600bhp aim also.









Then I started looking for a turbo kit, intercooler and pipes, twin plate clutch etc

Ended up going with a custom made sheepey built turbo kit from America with the new pte6062gen 2 turbo a few weeks later everything arrived and off to deliver them all.













How the car looks now and engine and fuel system all test fitted.















Car is currently waiting for the last few little bits and pieces fabricated/fitted then running in time and mapping I think

I can't say how pleased I am with how nice and tidy all of the work they have done so far, looking forward to seeing the finished build now.



Will post up final power figures and finished pictures once I get her home as I still have a few things to fit like splitter and carbon canards etc maybe get the inside painted and cage painted also.







Sent from my iPhone using Tapatalk

Last edited by Paul7rs2; 08-07-2017 at 23:17..
Paul7rs2 is offline   Reply With Quote
The Following 24 Users Say Thank You to Paul7rs2 For This Useful Post:
Cryptwalk (14-04-2016), darrenevo123 (27-05-2017), evolover21 (16-05-2016), F1-RS (07-08-2016), gafar187 (13-04-2016), GUM EVO (06-02-2016), ipnanoboxr19 (04-02-2016), jars121 (19-03-2016), KevRS (04-02-2016), M3 ROB (04-02-2016), mantazini (14-02-2016), Mr Max (27-05-2017), Mr Ralliart (14-02-2016), Realbadman (04-02-2016), Robmgti (04-02-2016), Seany (06-02-2016), Shaun 8215 (04-02-2016), squeakyclean32 (18-05-2016), staffi (03-02-2016), strange_days_uk (08-03-2017), Strizi (11-04-2016), Tom@AutoTorque (29-07-2016), tully-o (04-02-2016), WilkyWay (03-02-2016)
Old 03-02-2016, 16:07   #2
staffi
TOO many posts.......
 
staffi's Avatar
 
Join Date: Jul 2005
Location: Warwickshire.
Car: Ruri Blue IX GT
Posts: 17,023
Simply stunning, Black 5s have to be my fav of ALL Evos



Pete
__________________
staffi is offline   Reply With Quote
The Following User Says Thank You to staffi For This Useful Post:
Paul7rs2 (03-02-2016)
Old 03-02-2016, 16:13   #3
Triple L
Senior User
 
Join Date: Jan 2012
Posts: 1,228
Love it, the Sheepey stuff is dreamy! What's next on the cards dude?
Triple L is offline   Reply With Quote
The Following User Says Thank You to Triple L For This Useful Post:
Paul7rs2 (04-02-2016)
Old 03-02-2016, 16:19   #4
Paul7rs2
Senior User
 
Paul7rs2's Avatar
 
Join Date: Mar 2013
Posts: 909
My Evo 5 600hp build

Quote:
Originally Posted by Triple L View Post
Love it, the Sheepey stuff is dreamy! What's next on the cards dude?

Yeh it's a lovely piece of kit and the welds are 🏻 not sure more overtime to pay for some nice AP's haha, a few little more changes but not sure exactly what yet, it's turned into a complete money pit when it needed nothing on the first place


Sent from my iPhone using Tapatalk

Last edited by Paul7rs2; 09-02-2016 at 14:17..
Paul7rs2 is offline   Reply With Quote
The Following User Says Thank You to Paul7rs2 For This Useful Post:
evo stew (28-03-2016)
Old 03-02-2016, 16:20   #5
Paul7rs2
Senior User
 
Paul7rs2's Avatar
 
Join Date: Mar 2013
Posts: 909
Quote:
Originally Posted by staffi View Post
Simply stunning, Black 5s have to be my fav of ALL Evos



Pete

Cheers staffi 🏻


Sent from my iPhone using Tapatalk
Paul7rs2 is offline   Reply With Quote
Old 03-02-2016, 21:41   #6
Liam_d
Senior User
 
Liam_d's Avatar
 
Join Date: Aug 2015
Posts: 609
That's incredible mate! Very very nice
Liam_d is offline   Reply With Quote
The Following User Says Thank You to Liam_d For This Useful Post:
Paul7rs2 (04-02-2016)
Old 04-02-2016, 16:06   #7
Paul7rs2
Senior User
 
Paul7rs2's Avatar
 
Join Date: Mar 2013
Posts: 909
My Evo 5 600hp build

Thought I would put the spec list so far up and I'll update it as the build goes on.

ENGINE SPEC:
bore cylinders to 0.5mm over size with torque plate
New Wiseco HD pistons and rings
New BW I beam long rods
New big/small end, thrust bearings
Balance shaft delete kit
H11 head stud kit
All ARP bottom end
Arp exhaust manifold studs
New o/e oil pump
New o/e gasket kit
New o/e water pump
Strip and rebuild cylinder head
HKS head gasket
JUN 272 cams
Kigley valve springs
Ti retainers
New valve guides
Adjustable cam pulleys
New lash adjusters
JUN baffled sump
Tomei crank scraper
Kigley racing HLA regulator valve
Engine and all parts fully balanced
-an10 breather mod to rocker cover
-an10 oil catch/separator tank


TURBO/INTAKE/EXHAUST:
Sheepey built bottom mount vband manifold
Precision 6062gen2 turbo vband in/out .63
Zircotec coated manifold, turbo and elbow
Turbo smart 45mm black wastegate
External screamer pipe
Oil line kit
4" intake pipe
Driven innovations inlet manifold
Large K&N filter
3" custom made turbo back exhaust
S90 3" throttle body
Custom made hard pipe kit to match the size of the s90
ETS 3.5" intercooler



FUELING/ENGINE MANAGEMENT:
LinkG4 ecu with 4 bar map sensor and ait sensor
1000cc injectors
Braided fuel lines with an fittings
Walbro intank pump
Swirl pot in boot
External Bosch 044 fuel pump
Inline filter
Braided lines with an fittings


SUSPENSION/HANDLING:
Car is fully stripped inside except dash board
Ohlins adjustable coilovers with pillar ball top mounts
6 point roll cage
RS front and rear braces
H brace and subframe braces underneath
HKS 3 point front strut brace
HKS 2 point rear strut brace
Mines rear strut top to floor braces


BRAKES/WHEELS/TYRES:
Enkie rpf1's in black 8.5jx17 et30
225-45-17 toyo r888 tyres
Alcon 343mm fronts
Brembo rear's
Hel braided lines
Racing brake fluid

GEARBOX/TRANSMISSION:
Standard 5 speed rebuilt
Exedy twin plate clutch
RS rear diff
Standard transfer box


EXTERIOR:
Carbonetix vortex generator
Carbonetix front canards
(not yet fitted)
Trackdaysplitters custom front splitter
(Not yet fitted)
Carbon goodies rear diffuser


INTERIOR:
Fully stripped except dash
Air bags removed
No sound deadening/carpets
6 point roll cage
Recaro SPG front seats
OMP 330mm suede wheel
OMP 3" 4 point harnesses
Spa oil pressure/temperature
Spa boost/intake temperature
Switchable maps on dash
Launch/Als control on dash
Kill switch on dash


Sent from my iPhone using Tapatalk

Last edited by Paul7rs2; 28-07-2016 at 17:55..
Paul7rs2 is offline   Reply With Quote
Old 04-02-2016, 16:16   #8
MidnightE6
Senior User
 
MidnightE6's Avatar
 
Join Date: Jan 2011
Location: Staffordshire
Car: DC5 & Audi B/Edition
Posts: 9,906
Wow! That's some car and spec! Nice!
__________________
MidnightE6 is offline   Reply With Quote
The Following User Says Thank You to MidnightE6 For This Useful Post:
Paul7rs2 (04-02-2016)
Old 04-02-2016, 16:36   #9
skinner6
Senior User
 
skinner6's Avatar
 
Join Date: Feb 2013
Posts: 660
What front headlights do you have Paul ?
skinner6 is offline   Reply With Quote
Old 04-02-2016, 16:42   #10
Paul7rs2
Senior User
 
Paul7rs2's Avatar
 
Join Date: Mar 2013
Posts: 909
Quote:
Originally Posted by skinner6 View Post
What front headlights do you have Paul ?

I bought another set that had been took apart and painted on the inside, I'm not to sure if it's all to black now lol they need brighter bulbs I must admit but I'm starting to like them more now


Sent from my iPhone using Tapatalk
Paul7rs2 is offline   Reply With Quote
Old 04-02-2016, 16:57   #11
Aj82
Senior User
 
Join Date: Dec 2013
Posts: 812
Looks stunning mate and lovely spec too.

Cheers Aj
Aj82 is offline   Reply With Quote
The Following User Says Thank You to Aj82 For This Useful Post:
Paul7rs2 (04-02-2016)
Old 04-02-2016, 17:02   #12
Black.tommi.mak
User
 
Black.tommi.mak's Avatar
 
Join Date: Jan 2016
My Car
Posts: 95
Nice car mate
Black.tommi.mak is offline   Reply With Quote
The Following User Says Thank You to Black.tommi.mak For This Useful Post:
Paul7rs2 (04-02-2016)
Old 04-02-2016, 17:07   #13
Realbadman
Senior User
 
Realbadman's Avatar
 
Join Date: Sep 2009
Location: Near London
Car: Evo x FQ-360 (standard but nt 4 long)
Posts: 3,401
Send a message via Yahoo to Realbadman
Wicked car just keep the updates coming m8.
Realbadman is offline   Reply With Quote
The Following User Says Thank You to Realbadman For This Useful Post:
Paul7rs2 (04-02-2016)
Old 04-02-2016, 17:53   #14
KevRS
Registered User
 
Join Date: Mar 2014
Location: Aberdeenshire
Car: Reims blue Evo 6 GSR
Posts: 533
Love those wheels in black, did you paint the calipers yourself or send them away?
KevRS is offline   Reply With Quote
Old 04-02-2016, 17:55   #15
Tising
User
 
Join Date: Nov 2015
Location: Copenhagen
Car: Mitsubishi EVO VI TME
Posts: 54
Awesome!!!!
What hard pipe is that?
Tising is offline   Reply With Quote
The Following User Says Thank You to Tising For This Useful Post:
tj hooker (30-01-2017)
Mitsubishi Lancer Register
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




All times are GMT. The time now is 15:18.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.