Lancer Register Forum banner

Ceddymods Help

4K views 7 replies 6 participants last post by  sbn1979 
#1 ·
Hey so I'm fairly new to the forums/evos/tuning - I downloaded ceddymods and flashed it to my car (1999 Evo VI). It seemed to flash properly, no errors or anything but I don't know if it worked? I tried anti lag - stopped on the road and floored it and it just redlined. I also changed my primary ignition to negative values on low load and high rpm to get some bangs and pops and I did not get any.

I read the rom with ecuflash and it says that ceddymods is on there. Not sure if i'm doing something?

Any help appreciated. I can upload pics too if needed.

Thanks
 
#3 ·
I know that would be best but then I'd never learn how to do it! :angel:

Any reason why anti-lag/launch control wouldn't work? It's currently set to work at <12km/h with at least 80% throttle. Maybe I should lowered the throttle percent and reflash?
 
#5 ·
Have you changed the values in the SAS air injection settings?
Most cars won't bang unless.
Do you still have the SAS in that car?

What xml are you using?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top