Lancer Register Forum banner

NEW PRODUCT! Voltex style front bumper from ND!! Evo 789

28K views 36 replies 16 participants last post by  EtsonEvo 
#1 · (Edited)
As per title we have moulded the Voltex bumper on my Evo 9 SWB and made some extra design tweaks to improve aero yet further!

In addition to the tweaks it is actually affordable now.........this will be BETTER aerodynamically than Voltex shelf item (More like the one they actually run on the CyberEvo).

Only fits 789 of course and comes in fibreglass rather than carbon (can be done in carbon if demand is sufficient). Benefits as below;

1) Affordable pricing.....only £1299 Inc Vat
2) Deeper and raised edge splitter front edge design for increased downforce
3) Splitter lower to the ground (Can be raised if required)
4) Two main pieces to front bumper now rather than about 10!!!
5) Bumper and splitter can be removed indivdually more easily
6) Oil cooler/brake duct holes filled in (Can be cut out only if so required)
7) All parts available seperately should you damage a piece
8) Fast lead times on bumpers and spares

This is the BEST Evo 789 front bumper available for front end grip and downforce!

As you can see on the attached picture we have lowered the splitter on my car (hence the silver aluminium strip), this better position has been integrated into the new ND design.

Cheers

Simon :)

UPDATE: New style higher downforce splitter featured with this bumper free of charge! See Post #36
 

Attachments

See less See more
1
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top