Go Back   Mitsubishi Lancer Register Forum > Blogs

Other Things
Old

Evo 8 gsr brakes

Posted 22-06-2014 at 09:03 by R8eck82

Hi people

I have put new front discs and pads in, discs r mintex and pads r ebc yellow stuff put the n/s squeals really badly when breaking lightly, also this is my 3rd set of pads to try and solve the problem, need help people please.
Junior User
Posted in Other Things
Views 6371 Comments 0 R8eck82 is offline Edit Tags
Old

Exedy

Posted 30-03-2014 at 18:32 by BeselEvo6

:smthumbup
Attached Images
   
Registered User
Posted in Other Things
Views 6293 Comments 0 BeselEvo6 is offline Edit Tags
Old
Rating: 2 votes, 5.00 average.

AVC-R set up help

Posted 23-12-2012 at 00:04 by Lee5
Tags avcr

Rough guide to setting up an AVCR:

1. You need to set up the NE points to start with, 2500, 3500, 4500, 5500, 6000, 6500, 7000, 7500.

2. set the car settings to 4 4 arrow to the North East.

3. Set the graph scales, speed, boost etc.

4. Set FB speed to 0 and learn gear to X.

5. Ensure the start duty to 0% for all gears.

6. Then set gear judge up, drive along in first, with the AVCR in the Gear Judge menu, you...
Lee5's Avatar
Moderator
Posted in Other Things
Views 11900 Comments 0 Lee5 is offline Edit Tags
Old

HELP NEEDED! I Have An Impreza Challenge

Posted 31-03-2012 at 11:09 by Street 6ix

Hi All (New To All This)
I need help from all evo gods as me and my best friend have bin evo & impreza rivels since we was little and we thought we will sort this out once and for all.
rules are:
we both have 5,000 to spend to buy and do up our car for a 2 part race drag & track we have till end October to do so and loser has there car CRUSHED
1) 5,000 MAX
2) NO ENGINE SWAPS UNLESS BROUGHT LIKE IT
3) CAR HAS TO BE USABLE FOR EVERY DAY SO NO REMOVING...
Registered User
Posted in My Car, Other Things
Views 10151 Comments 2 Street 6ix is offline Edit Tags
Old

BBS CH HELP Please!!!

Posted 21-10-2011 at 18:41 by nicolas841

Hi everyone. Recently purchased an E8 on 19" BBS CH alloys, lovely looking wheels but appear to have a major issue :cry: The idiot who had them fitted originally has fallen into what appears to be a common problem and bought them with the 112 pcd and put wheel nuts without the correct 60degree taper on them :wallbang: Subsequently the nuts have worn horribly! Its been suggested that assuming the wheels and hubs/threads aren't damaged then using 'wobble' nuts should be fine, the correct spigot...
Junior User
Posted in Other Things
Views 9915 Comments 0 nicolas841 is offline Edit Tags



All times are GMT. The time now is 03:53.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.